Application Detail & Area

Present Indian Scenario

India loses around Rs. 24000 crores every year on account of corrosion and enormous number of infrastructures along with cost of Indian economy, which are corroding in crying need of repairing and rehabilitation. Rebuilding them we would mean it in decreased expenditure. We need to fight against corrosion using corrosion protection techniques; the latest techniques are now available in our country.

 

Metals are mostly in the form of their oxides, sulfates, chlorides, silicates, basic carbonates etc... Almost every metal surface comes in contact with gases or liquids and the decay of metal is either due to chemical or electrochemical reactions.

 

Any chemical process or electrochemical reaction, which starts decay or destruction of the metal due to surrounding environment is called corrosion.  The most popular type of corrosion is rusting (Iron & steel). When metal comes in contact with atmospheric air or solid-gas halogenous system and under this condition, corrosion starts, which is termed as an Atmospheric Corrosion.

​

​

Almost all machinery and other resources are partly made of steel if not fully. In order to increase industrial advancement, it is necessary to make sure that the steel is made corrosion resistant by using the right kind of protective coating.

​

 We specialize in the following services:

• Inspection and detection of corrosion in assets and resources on site

• Recommendations for implementing corrosion prevention systems, including methods of cleaning the surface and the degree of cleaning required

• Periodic checks of the anti-corrosive paint work to ensure that the protective systems are in place

​

The Protex brand of protective coating has been continuously evolving over the years to meet the changing requirements of anti-corrosive coating. We are wholly committed towards complete customer satisfaction through high quality and consistent supply. We believe in not only delivering the products but also in transferring our technology at best rates and user friendly application.

​

We would love to have you on board of our large family of customers. We intend create a disruptive effect

​

How Corrosion Destroys

Corrosion may begin in a small way, but gradually increases in manifold as corrosion occupy 20 to 30 times the volume occupied by the original matter. Speed of expansion takes place, cracks soon appears and this further aggravates corrosion, leads to total working capacity of structure. At this stage, nothing much can be done to prevent the laiture of the structures. You have to either rehabilitate or rebuild.

​

To find a permanent solution to the problem of corrosion, several methods have been tried; however none of them have been so successful in preventing corrosion in the long term basis. Some methods have even aggravated the problem to some extent, but the only solution is to apply a suitable protective coating.

​

Proper material selection

Your project may result into failure if you have not applied the exact system of material selection. The wrong material selection at the time of project preparation confirms the corrosion.

​

For old rusted surface, we can provide specialized surface preparation system before applying anti-corrosive coating application.

Now, you will be benefited from coatings, which are as follows.

      •         Continuous production lineup.

      •         Easy moving production.

      •         Proper quality Control.

      •         Lower maintenance.

      •         An accident avoider.

      •         Long Term protection.

      •         Time saver.

      •         Richest economy.

      •         Special attractive surface.

​

Through our consultant’s guideline, R and D work, laboratory testing and experience, we can provide all acid, alkaline, solvent resistant systems. We also provide resistant systems for chemical fumes, gases, temperature and sea water effect in direct approach.

Mechanical Cleaning

​

The oil and grease have to be removed first by wiping with solvents such as mineral turpentine, petrol, petroleum solvent, trichloroethylene, tri sodium phosphate or by detergent degreasing. The secondary layers of scales and rust removed by hand tools and then remaining rust and scale removed by the use of sanding machines, scales, needle guns or rotary disk colorants.

​

Blast Cleaning

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

Blast cleaning is a process by which the surface is being prepared by bombardment with small hard particles directed at the surface at very high velocity resulting into the de-scaling of all scale and rust. To some extent, even the steel surface itself is ruptured.

​

Sand blasting through copper slug, Sand and greet to achieve SA 2 ½ specifications

​

GOAL

We want to reach to our customers and interact with them to find out about their needs and expectations, so we can fulfill them. Thus we want to provide quality product which is out of competition, which reduces the time of customer to select us for our services again and again.

​

YOU ARE ALWAYS WELCOME TO HAVE YOUR VALUED COMMENTS FOR BETTER APPROACH TOWARDS YOU.

​

​

Application Area

We have wide range of application such as surface preparation, anti-corrosive coating, brick lining, flooring, heat resistant coating, water proofing in some cases Zinc and Aluminum spraying that satisfies the different Industries which adopts these operations are as follows.

(1) Pharmaceutical Plant

(2) Chemical and Fertilizer

(3) Dyestuff Unit

(4) Petrochemical

(5) Automobile work shop

(6) Port, Warehouse

(7) Thermal Power Project

(8) Food Processing and Dairy Plant

(9) Battery Unit

(10) Heavy metal Industries

(11) Effluents, Waste water treatment plant and D.M. Plant

(12) Bottling Plant

(13) Steel Plant

(14) Paper, Pulp and Rayon Industries

(15) Earth Project

(16) Cooling Tower